高分子永久抗靜電劑ASTPEEN-806符合ROHS環保要求。適合應用于PC、PA6、ABS等材料的抗靜電處理。相容性好、無析出，不受溫濕度的影響。建議添加量10-30%，制品表面電阻值可達到107-11Ω。能有效防止/遏制因靜電造成的損害。
Polymer permanent antistatic agent ASTPEEN-806 meets ROHS environmental protection requirements. It is suitable for antistatic treatment of PC, PA6, ABS and other materials. It has good compatibility, no precipitation, not affected by temperature and humidity. It is recommended to add 10-30%, and the surface resistance of the product can reach 107-11 Ω. It can effectively prevent or contain the damage caused by static electricity.
測試項目 Test items | 單位 | 測試方法 Test method | 典型值 Typical value |
拉伸強度/Tensile Strength,25℃ | MPa | GB/T 528 | 10.3 |
斷裂伸長率/Elongation at Break,25℃ | % | GB/T 528 | 883 |
邵氏硬度/Shore Hardness,25℃,3s | HD | GB/T 2411 | 23 |
熔體流動速率/Melt flow rate,（210℃,2.16kg） | g/10min | GB/T 3682 | 9.68 |
密度/Density | g/cm3 | GB/T 1033 | 1.28 |
表面電阻值/Surface resistance value | Ω | GB/T 1410 | 1.9×106 |
烘料干燥溫度/Drying Temperature | ℃ | - | 85-135 |
干燥時間/Drying Time | hr | - | 2-4 |